faqs.org - Internet FAQ Archives

RFC 4481 - Timed Presence Extensions to the Presence Information


Or Display the document by number




Network Working Group                                     H. Schulzrinne
Request for Comments: 4481                                   Columbia U.
Category: Standards Track                                      July 2006

                    Timed Presence Extensions to the
               Presence Information Data Format (PIDF) to
     Indicate Status Information for Past and Future Time Intervals

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   The Presence Information Data Format (PIDF) defines a basic XML
   format for presenting presence information for a presentity.  This
   document extends PIDF, adding a timed status extension
   (<timed-status> element) that allows a presentity to declare its
   status for a time interval fully in the future or the past.

Table of Contents

   1. Introduction ....................................................2
   2. Terminology and Conventions .....................................2
   3. Timed-Status Element ............................................3
   4. Example .........................................................4
   5. The XML Schema Definition .......................................5
   6. IANA Considerations .............................................6
      6.1. URN Sub-Namespace Registration for
           'urn:ietf:params:xml:ns:pidf:timed-status' .................6
      6.2. Schema Registration for Schema
           'urn:ietf:params:xml:ns:pidf:timed-status' .................7
   7. Security Considerations .........................................7
   8. References ......................................................7
      8.1. Normative References .......................................7
      8.2. Informative References .....................................7
   Contributor's Address ..............................................8
   Acknowledgements ...................................................8

1.  Introduction

   Traditionally, presence information, e.g., represented as Presence
   Information Data Format [3] (PIDF) and augmented by Rich Presence
   Information Data format [9] (RPID), describes the current state of
   the presentity.  However, a watcher can better plan communications if
   it knows about the presentity's future plans.  For example, if a
   watcher knows that the presentity is about to travel, it might place
   a phone call earlier.

   In this document, we use terms defined in RFC 2778 [7].  In
   particular, a "presentity", abbreviating presence entity, provides
   presence information to a presence service.  It is typically a
   uniquely-identified person.

   RPID already allows a presentity to indicate the period when a
   particular aspect of its presence is valid.  However, the <status>
   element in the PIDF <tuple> does not have this facility, so that it
   is not possible to indicate that a presentity will be OPEN or CLOSED
   in the future, for example.

   It is also occasionally useful to represent past information since it
   may be the only known presence information; it may give watchers an
   indication of the current status.  For example, indicating that the
   presentity was at an off-site meeting that ended an hour ago
   indicates that the presentity is likely in transit at the current
   time.

   It is unfortunately not possible to simply add time range attributes
   to the PIDF <status> element, as PIDF parsers without this capability
   would ignore these attributes and thus not be able to distinguish
   current from future presence status information.

   This document defines the <timed-status> element that describes the
   status of a presentity that is either no longer valid or covers some
   future time period.

2.  Terminology and Conventions

   The key words MUST, MUST NOT, REQUIRED, SHOULD, SHOULD NOT,
   RECOMMENDED, MAY, and OPTIONAL in this document are to be interpreted
   as described in BCP 14, RFC 2119 [1].

3.  Timed-Status Element

   The <timed-status> element is a child of the <tuple> element and MUST
   NOT appear as a child of a PIDF <status> element or another
   <timed-status> element.  More than one such element MAY appear within
   a PIDF <tuple> element.

   Sources of <timed-status> information should avoid elements that
   overlap in time, but since overlapping appointments are common in
   calendars, for example, receivers MUST be able to render such
   overlapping <timed-status> indications.

   The <timed-status> element MUST be qualified with the 'from'
   attribute and MAY be qualified with an 'until' attribute to describe
   the time when the status assumed this value and the time until which
   this element is expected to be valid.  If the 'until' attribute is
   missing, the information is assumed valid until the tuple is
   explicitly overridden or expires as defined by the publication
   mechanism used.  The time range MUST NOT encompass the present time,
   i.e., the PIDF <timestamp> value, as that would provide an
   unnecessary and confusing alternate mechanism to describe presence.
   Thus, the 'from' attribute for tuples without an 'until' attribute
   MUST refer to the future.

   During composition, a presence agent (PA) may encounter a stored
   <timed-status> element that covers the present time.  The PA MAY
   either discard that element or MAY convert it to a regular <status>
   element if it considers that information more credible.

   The <timed-status> element may contain the <basic> and <note>
   elements, as well as any other element that is appropriate as a PIDF
   <status> extension and that has a limited validity period.  Examples
   include the PIDF-LO [8] extensions for location objects.

   This extension chose absolute rather than relative times, since
   relative times would be too hard to keep properly updated when
   spacing notifications, for example.  Originators of presence
   information MUST generate time values in the <timed-status> elements
   that are fully in the past or future relative to local real
   (wallclock) time and the time information contained in the optional
   PIDF <timestamp> element.

4.  Example

   An example combining PIDF and timed-status is shown below:

   <presence xmlns="urn:ietf:params:xml:ns:pidf"
     xmlns:ts="urn:ietf:params:xml:ns:pidf:timed-status"
       entity="pres:someone@example.com">

     <tuple id="c8dqui">
       <status>
         <basic>open</basic>
       </status>
       <ts:timed-status from="2005-08-15T10:20:00.000-05:00"
          until="2005-08-22T19:30:00.000-05:00">
          <ts:basic>closed</ts:basic>
       </ts:timed-status>
       <contact>sip:someone@example.com</contact>
     </tuple>
     <note>I'll be in Tokyo next week</note>
   </presence>

5.  The XML Schema Definition

   The XML [4] schema [5][6] is shown below.

   <?xml version="1.0" encoding="UTF-8"?>
   <xs:schema xmlns:ts="urn:ietf:params:xml:ns:pidf:timed-status"
   xmlns:pidf="urn:ietf:params:xml:ns:pidf"
   xmlns:xs="http://www.w3.org/2001/XMLSchema"
   targetNamespace="urn:ietf:params:xml:ns:pidf:timed-status"
   elementFormDefault="qualified" attributeFormDefault="unqualified">

     <xs:import namespace="urn:ietf:params:xml:ns:pidf"/>

     <xs:annotation>
        <xs:documentation>
          Describes timed-status tuple extensions for PIDF.
        </xs:documentation>
     </xs:annotation>
     <xs:element name="timed-status" type="ts:timed-status"/>
     <xs:complexType name="timed-status">
       <xs:sequence>
         <xs:element name="basic" type="pidf:basic" minOccurs="0"/>
         <xs:element name="note" type="pidf:note" minOccurs="0"/>
         <xs:any namespace="##other" processContents="lax" minOccurs="0"
           maxOccurs="unbounded"/>
       </xs:sequence>
       <xs:attribute name="from" type="xs:dateTime" use="required"/>
       <xs:attribute name="until" type="xs:dateTime"/>
     </xs:complexType>
   </xs:schema>

6.  IANA Considerations

   This document calls for IANA to register a new XML namespace URN and
   schema per [2].

6.1.  URN Sub-Namespace Registration for
      'urn:ietf:params:xml:ns:pidf:timed-status'

   URI:  urn:ietf:params:xml:ns:pidf:timed-status

   Description:  This is the XML namespace for XML elements defined by
      RFC 4481 to describe timed-status presence information extensions
      for the status element in the PIDF presence document format in the
      application/pidf+xml content type.

   Registrant Contact:  IETF, SIMPLE working group, simple@ietf.org;
      Henning Schulzrinne, hgs@cs.columbia.edu

   XML:

    BEGIN
      <?xml version="1.0"?>
     <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN"
      "http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd">
      <html xmlns="http://www.w3.org/1999/xhtml
      <head>
           <meta http-equiv="content-type"
           content="text/html;charset=iso-8859-1"/>
           <title>Timed Presence Extensions to the Presence
           Information Data Format (PIDF) to Indicate Status
           Information for Past and Future Time Intervals</title>
      </head>
      <body>
          <h1>Namespace for timed-status presence extension</h1>
          <h2>urn:ietf:params:xml:ns:pidf:timed-status</h2>
          <p>See <a href="http://www.rfc-editor.org/rfc/rfc4481.txt">
              RFC4481</a>.</p>
       </body>
       </html>
      END

6.2.  Schema Registration for Schema
      'urn:ietf:params:xml:ns:pidf:timed-status'

   URI:  urn:ietf:params:xml:ns:pidf:timed-status

   Registrant Contact:  IESG

   XML:  See Section 5

7.  Security Considerations

   The security issues are similar to those for RPID [9].

8.  References

8.1.  Normative References

   [1]  Bradner, S., "Key words for use in RFCs to Indicate Requirement
        Levels", BCP 14, RFC 2119, March 1997.

   [2]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January
        2004.

   [3]  Sugano, H., Fujimoto, S., Klyne, G., Bateman, A., Carr, W., and
        J. Peterson, "Presence Information Data Format (PIDF)", RFC
        3863, August 2004.

   [4]  Yergeau, F., Paoli, J., Sperberg-McQueen, C., Bray, T., and E.
        Maler, "Extensible Markup Language (XML) 1.0 (Third Edition)",
        W3C REC REC-xml-20040204, February 2004.

   [5]  Maloney, M., Beech, D., Thompson, H., and N. Mendelsohn, "XML
        Schema Part 1: Structures Second Edition", W3C REC REC-
        xmlschema-1-20041028, October 2004.

   [6]  Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes Second
        Edition", W3C REC REC-xmlschema-2-20041028, October 2004.

8.2.  Informative References

   [7]  Day, M., Rosenberg, J., and H. Sugano, "A Model for Presence and
        Instant Messaging", RFC 2778, February 2000.

   [8]  Peterson, J., "A Presence-based GEOPRIV Location Object Format",
        RFC 4119, December 2005.

   [9]  Schulzrinne, H., Gurbani, V., Kyzivat, P., and J. Rosenberg,
        "RPID: Rich Presence Extensions to the Presence Information Data
        Format (PIDF)", RFC 4480, July 2006.

Contributor's Address

   Jonathan Rosenberg
   dynamicsoft
   600 Lanidex Plaza
   Parsippany, NJ 07054-2711
   USA
   EMail: jdrosen@dynamicsoft.com

Acknowledgements

   This document is based on the discussions within the IETF SIMPLE
   working group.  Mary Barnes, Avri Doria, Miguel Garcia, Vijay
   Gurbani, Hisham Khartabil, Paul Kyzivat, Mikko Lonnfors, Yannis
   Pavlidis and Jon Peterson provided helpful comments.

Author's Address

   Henning Schulzrinne
   Columbia University
   Department of Computer Science
   450 Computer Science Building
   New York, NY  10027
   US

   Phone: +1 212 939 7004
   EMail: hgs+simple@cs.columbia.edu
   URI:   http://www.cs.columbia.edu

Full Copyright Statement

   Copyright (C) The Internet Society (2006).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).

 

User Contributions:

Comment about this RFC, ask questions, or add new information about this topic: